By: AdvWisdomTitle: R1150GS Fuel Gauge RepairSourced From: advwisdom.com/a/r1150gs-fuel-gauge-repair/Published Date: Sun, 12 Jul 2020 23:33:29 +0000 How To Fix A Sticking Fuel Gauge About 8 months ago my ’03 1150 GSA did stop to show the top fuel bar on the RID even if filled up to the neck. I did not pay much attention because… read more »
By: AdvWisdomTitle: R12GS Final Drive Fluid ChangeSourced From: advwisdom.com/a/r12gs-final-drive-fluid-change/Published Date: Sun, 12 Jul 2020 23:21:26 +0000 Photo instructions on changing the R12GS final drive oil After removing the rear wheel, remove the bolt that holds the ABS sensor, then pull the sensor out of the FD housing. A little twisting motion helps, as the O-ring… read more »
By: AdvWisdomTitle: Husqvarna 701 LR SpecsSourced From: advwisdom.com/a/husqvarna-701-lr-specs/Published Date: Wed, 28 Oct 2020 16:03:55 +0000 Extremely well-balanced and delivering impressive agility and handling, the 701 Enduro LR comes fitted with fully adjustable 48 mm WP XPLOR upside-down forks and a WP XPLOR rear shock, offering 250 mm of wheel travel and excellent all-terrain capabilities. The… read more »
By: AdvWisdomTitle: KLR Subframe ModSourced From: advwisdom.com/a/klr-subframe-mod/Published Date: Mon, 20 Jul 2020 01:13:39 +0000 KLR650 Subframe drill thru step by step walkthru Enclosed is a step-by-step process for the replacement of the stock KLR650 �sub-frame� fasteners. 2x kits are available. I did not know both kits accomplish the same task, so I ordered both. One… read more »
By: AdvWisdomTitle: LC4 Water Pump RebuildSourced From: advwisdom.com/a/lc4-water-pump-rebuild/Published Date: Mon, 20 Jul 2020 01:01:41 +0000 Rebuilding the LC4 Mechanical Water Pump THE PROBLEM If your water pump is leaking coolant into your engine, it�s time to replace your water pump seal and bearings right away. Coolant is corrosive to various internal parts of an engine,… read more »
By: AdvWisdomTitle: Oilhead Fork Seal ReplacementSourced From: advwisdom.com/a/oilhead-fork-seal-replacement/Published Date: Mon, 20 Jul 2020 00:52:37 +0000 Replacing Fork Seal (oilhead) I’ve busted another (it’s the 2.nd in 4 months) fork seal and I intend to replace it myself. I’ve searched the wisdom here and it looks simple. Just to make sure, can the wrench gods confirm… read more »
By: AdvWisdomTitle: Oilhead Starter ModSourced From: advwisdom.com/a/oilhead-starter-mod/Published Date: Mon, 20 Jul 2020 00:41:11 +0000 Retrofitting Jump Starting Post to Oilheads Hi everyone. I just added a positive battery jumper post to my 1999 R1100S. I wrote up a brief “how to” for the R1100S board, but those of you with pre-2004 GS’s or other R… read more »
By: AdvWisdomTitle: Oilhead Timing the easy waySourced From: advwisdom.com/a/oilhead-timing-the-easy-way/Published Date: Mon, 20 Jul 2020 00:36:05 +0000 Timing Adjustment – No Tools Needed Well ok, not really no tools, but only two wrenches. NO electronic tools needed, and NO electrical knowledge. AND no need to remove the fuel tank. Setting the timing uses a ‘feature’ of… read more »
By: AdvWisdomTitle: Pennytech side cases w/picsSourced From: advwisdom.com/a/pennytech-side-cases-w-pics/Published Date: Mon, 20 Jul 2020 00:14:19 +0000 Build your own side cases hondo Enthusiast Joined: Aug 2006 Location: Denver, Colorado Posts: 968 I need to get the fixed hinges bent, and need to get to the rivets holding the top of the hinge to the can. So… read more »
By: AdvWisdomTitle: KLR DIY LED Aux LightsSourced From: advwisdom.com/a/klr-diy-led-aux-lights/Published Date: Tue, 14 Jul 2020 03:03:58 +0000 Homemade LED Auxiliary Lights for the KLR650 DIY Enclosed are the step by step instructions I used to make custom LED auxiliary/running lights. The intent of the lights are to supplement the KLR650 headlight. The advantages of this lighting… read more »